How To Install A Flat Screen TV On A Brick Wall

How To Install A Flat Screen TV On A Brick Wall

A brick wall is really a good place to install a flat screen TV. Brick is stronger and can support more weight than normal plaster, making the assembly much safer. The only difficulty is drilling the holes correctly and disguising the presence of the power cable. Beyond that, the process itself can be accomplished with a bit of know-how TV mounting work.


Determine the ideal location for your flat screen TV. It should be positioned so that you can see into it comfortably when sitting down. Note any nearby windows or light sources that may cause glare, and make sure you have enough space between the TV and your viewing spot for comfortable viewing. Experts suggest sitting two to three times the diagonal length of the TV for the best viewing experience. (So ​​for a 40-inch TV, you should sit 80 to 100 centimeters away.)

Set the first piece of the mount against the wall where you want the TV to go. Use a carpenter’s level to make sure it’s parallel to the ground, then use a piece of chalk to point out where the mounting screws need to go.

Drill holes for the mounting screws at the marked positions by drilling with a masonry bit. Place mounting anchors in holes to provide a more secure hold. (The TV mount may come with its own anchors for your use. Otherwise, #8 plastic mounting anchors should support a good 300lbs when mounted to a brick wall.)

Assemble the first part of the mount into position and secure it to the wall by screwing the large screws into the anchors. When you’re done, test the mount by giving it a few gentle tugs. It should not move at all. Hire painting services Brooklyn to get best.

Lay down some padding on the floor — old towels or a comforter will do — and place the flat-screen TV on top of it, back side up.

Screw the second piece of the TV mount into the back of the TV. You must have dwellings that fit the positions in the mounts. Double check your screws to ensure the bracket does not slip or wobble.

Raise the TV to the wall and place it on the first part of the wall mount. The two halves should click together. Lock them up using the security mechanism provided with the mount. Double check it when you’re done to make sure it’s holding up.

Run the power cord and cable wires through a wire tube that matches the hue of the brick wall, then mount the tube to the wall between the TV and the floor. Most wire tubing can be attached to the wall with adhesive. Use glue for those that don’t. 

You can buy plastic or metal pipes that reflect the basic color of the brick, or spray paint to match the color exactly. For paint you can hire installation services experts like kinginstallation.

Leave a Reply

Your email address will not be published. Required fields are marked *